Editing Scanco Administration (section)

====Unlock a locked controlfile====
In November 2023, Stephan Weiss suggested you can use:

  mcr ut:UCT_UPD_EVALSCR_MISC.EXE

and set locked to 0. For example, to change script #61:

  $ mcr ut:UCT_UPD_EVALSCR_MISC.EXE
  UCT_UPD_EVALSCR_MISC V1.0
  
  V IDX escript/Rec. Description
      1      1/1    XtremeCT Standard Patient Evaluation (RL,RR,TL,TR,CU)
      2      1/7    XtremeCT Standard Patient Evaluation (RL,RR,TL,TR,CU)
  *   3      1/9    XtremeCT Standard Patient Evaluation (RL,RR,TL,TR,CU)
      4      2/2    QC1 Trabecular Morphometry
      5      2/8    QC1 Trabecular Morphometry
      6      2/384  QC1 Trabecular Morphometry
  *   7      2/401  QC1 Trabecular Morphometry
      8      3/3    QC2
      9      3/6    QC2
     10      3/385  QC2
  *  11      3/402  QC2
  *  12      4/4    3D Segmentation of VOI, 1 solid objectAIM
  *  13      5/5    3D Seg. of 2 VOIs: solid dense in transparent low dens obj obj
    <snip>
    356     60/283  TEST - STEP2 SCSRV1_FAST
  * 357     60/290  Can be reused, irrelevant content
    358     61/284  TEST - STEP2 SCSRV1_FAST
  * 359     61/291  Can be reused, irrelevant content
    360     62/296  MCP Meta auto contour
  <snip>
    559    127/558  (ML) Knee Segmentation
  * 560    127/559  (ML) Knee Segmentation
  Choose evalscript Record (IDX): [560]: 359
  Description [Can be reused, irrelevant content]: 
  Valid [1]: 
  Locked [1]: 
  Favourite [0]: 
  Category [32]: 
  
  Save Record ? [Y]: Y
  Rewriting DB Idx          291
  Record saved successfully
  End of program

Also see the instructions about setting VALID and LOCKED in another part of the wiki under the heading "Valid and Locked Settings for an eval script"

But my old instructions are:

If you accidentally locked a controlfile, it is possible to unlock it so that it can again be modified.

Login as the calibration user (Xtremect:  calibration;  VivaCT40:  calib5019;   uCT35:  calib2339), the password is the same as for the system user, Set priviledges to bypass.
 $ spb

Set the controlfile database to the microct, or other, user where the controlfile is locked.  
*The file is usually located on (a)disk1:[username.database] and may be accessible using the uctd logical.  
*The database file contains the scanner ID (e.g., 3309 for the XtremeCT, note there's no SC before 3309).
 $ def uct_controlfiles_database adisk1:[microct.database]uct_controlfiles_3309.dat
 $ run ut:uct_upd_controlfiles

Choose the controlfile.Use T and F to indicate true and false.
*YOU MUST SAY YES TO UPDATE CTRL-FILE! There is a bug so do this even if you make a mistake.


[[Image:Redirect.jpg|15px]] [[#top|''Return to Contents'']] or [[Main_Page|''Return to Main Page'']]