Editing Finite Element Modelling (section)

====For Regular Sawbone AIM Construction====

Here, we will add the bone that is close to the screw with the rest of the bone and then add the screw to make the final construct.

*Use "add_aims" to add the outside bone to the closer bone to construct the complete bone.
*Use "cl_rank_extract" to clean up any lose pieces.
*Use "write" to write the complete bone to file.
*Use "set_value" to set the value of the screw (to 90 in my case) and then do it again to set the value of the bone construct (to 127 in my case).
*Use "add_aims" to add the screw and the complete bone together.
*Use "write" to write the construct to file for viewing.

To close IPL and finish the script do the following (shown below is the last command and how to close IPL and finish the script):

<pre>
!
  /write
    -name             construct
    -filename         "construct_file
    -compress-type    bin
    -version_020      true
!
..
$!
$  write sys$output "Finished."
$  exit
[END OF FILE]
</pre>

The ".." closes IPL and the rest is just finishing the script.


[[Image:Redirect.jpg|15px]] [[#top|''Return to Contents'']] or [[Main_Page|''Return to Main Page'']]