Editing Scanco Administration (section)

====Exporting Files / FAT file system====
If an external USB device is to be used to export measurement data to a Windows or MAC OS, the USB device must be formatted as FAT file system.

- Attach the USB device to the front USB port of the Itanium.
(note: Itanium rx2620 only supports USB1, which will have a very slow transfer rate)

- Open the Scanco backup/archive software.

- Do not “Initialize<” or “Mount” the USB device !

- Select the measurement data to be copied to the USB device, may be even sub-select the wished file type
(TIF files in the example below).

- Select “Copy To:” and “USB/FAT” and click “Start<” to copy the selected data to the USB device.

Once the USB device is connected to Windows or MAC OS, it will show a ZIP file named like the copied measurement
number. This ZIP file contains the same directory structure like the data disk on OpenVMS: 

data\sample number\measurement number

In the lowest sub-directory are the copied files, as selected in the backup/archive software (TIF files in this example).


[[Image:Redirect.jpg|15px]] [[#top|''Return to Contents'']] or [[Main_Page|''Return to Main Page'']]