Editing Scanco Administration (section)

====Use 'Script...' button====
Usually, you will start the move/copy by clicking on <code>'Start...'</code> button. The <code>'Script...'</code> button is for advanced users.

*Use of the 'Script...' button will generate a script <code>sys$scratch:archive.com</code>, that you may submit it in batch mode later (e.g. over night) by typing: <pre>$ scanco_submit_command sys$scratch:archive.com/after=23:59</pre>
*In a multi-computer cluster setup, you may want to specify the exact queue name of the computer that has the tape hooked up by giving e.g. <code>/que=sceval_fast</code>.
*Insert a tape, but do NOT mount the tape in the normal program. If necessary: if it's a new tape, [[Scanco_Administration#Initialize_a_New_Tape|'''initialize''']] it as usual. 
*The batch job will be started one minute before midnight in the example above. <code>$ show entry</code> will show you that it is holding until then.
*See <code>$ help submit /after</code> and <code>$ help dcl_tips date_time example</code> for more help on this.
*Sample script file (archive.com) restoring the RSQs of measurements 6452 and 6580:
<pre>
$ MOUNT/FOREIGN TP0:
$ UCT_BACKUP_BATCH
ALL
RAW
COPY
DISK
! Meas: SB_BUIE_EX_CTRL_PH_01 (6452)
MEAS
6452
EXECUTE
! Meas: SB_BUIE_EX_CTRL_PH_01 (6580)
MEAS
6580
EXECUTE
EXIT
$ DISMOUNT TP0:
$ EXIT 
</pre>


[[Image:Redirect.jpg|15px]] [[#top|''Return to Contents'']] or [[Main_Page|''Return to Main Page'']]