Editing Scanco Administration (section)

====Disk not mounted/unavailable, directory not found, volume not enabled====
Disk is not mounted or is unavailable.  Error opening ...., directory not found, volume is not software enabled.
<pre>
%DIRECT-E-OPENIN, error opening DISK4:[MICROCT.PROJECTS]*.*;* as input
-RMS-E-DNF, directory not found
-SYSTEM-F-VOLINV, volume is not software enabled
</pre>
This can happen if communication is broken between workstations, causing the disk mount to time out.  Check if this is by showing the devices, then dismount and remount the disk.
<pre>
$ show dev

Device                  Device           Error    Volume         Free  Trans Mnt
 Name                   Status           Count     Label         Space Count Cnt
SC3309$DKA100:          Online               0
SC3309$DKD0:            Mounted              0  ALPHASYS        3.18GB   642   2
SC3309$DKD1:            Mounted              0  AUSER_01       42.84GB     4   2
SC3309$DKD2:            Mounted              0  ADATA_01      173.00GB     4   2
SC3309$DKD3:            Mounted              0  ADATA_02A     215.80GB     1   2
SC3309$DKD4:            Mounted              0  ADATA_02B     215.85GB     1   2
SC3309$DKD5:            Mounted              0  ADATA_02C     215.81GB     1   2
SC3309$DQA0:            Online               0
SC3309$DQA1:            Offline              1
SC3309$DQB0:            Offline              1
SC3309$DQB1:            Offline              1
SCEVAL$DKA0:            Online               0
SCEVAL$DKA1500:         Mounted              0  (remote mount)                 1
SCEVAL$DKC0: MntVerifyTimeout 0 ADATA_03A 541.62GB 1 2 
SCEVAL$DKC1: MntVerifyTimeout 0 ADATA_03B 541.38GB 1 2 
SCEVAL$DKC2: MntVerifyTimeout 0 ADATA_03C 541.60GB 1 2 
SCEVAL$DQA0:            Online               0


$ set host 0
system

$ dismount SCEVAL$DKC0:
$ mount/cluster SCEVAL$DKC0: ADATA_03A
%MOUNT-I-MOUNTED, ADATA_03A mounted on _SCEVAL$DKC0:
$ mount/cluster SCEVAL$DKC1: ADATA_03B
%MOUNT-I-MOUNTED, ADATA_03B mounted on _SCEVAL$DKC1:
$ mount/cluster SCEVAL$DKC2: ADATA_03C
%MOUNT-I-MOUNTED, ADATA_03C mounted on _SCEVAL$DKC2:
$
</pre>

If this does not restore the disk, then shutdown the computer.  At the blue screen...
<code>>>> init</code>
Wait for blue screen to return.
<code>>>> run bios pya0</code>
Press F2 at the prompt to accept potential data loss.
Wait for blue screen to return.
<code>>>></code>
Press power button to turn off.
Press power button to turn on.


[[Image:Redirect.jpg|15px]] [[#top|''Return to Contents'']] or [[Main_Page|''Return to Main Page'']]