Editing Scanco Administration (section)

==Access VMS filesystem==
===Access XtremeCT VMS filesystem on a Mac===

In finder, select Go --> Connect to Server 

This opens up a window that allows you to enter a server address. Enter the following information: 
<pre>smb://136.159.130.28</pre>

Click connect. If the internet connection is working, you will then be prompted to enter in login info:

<pre>
USERNAME: xtremect
PASSWORD: uct
</pre>

Select the volumes you want to mount.


[[Image:Redirect.jpg|15px]] [[#top|''Return to Contents'']] or [[Main_Page|''Return to Main Page'']]

===View XtremeCT VMS filesystem from a Windows PC===

The HP program that allows the VMS file system to be viewed by a PC is called Pathworks (on the VMS system).  The following information is needed to connect to the VMS system:

<pre>
USERNAME: xtremect
PASSWORD: uct
WORKGROUP: microct
</pre>

Then, in Windows explorer, while connected in the same network as the VMS station (i.e., .130) enter the following IP address for Thomas (SC3309):

<pre>\\136.159.130.28\</pre>

Alternatively, map the drive.
<pre>
Right click on my computer and choose map network drive. 

Folder:
\\136.159.130.28\UCT_DATA1
or
\\136.159.130.28\UCT_DATA2

User name: xtremect@microct
Password:  uct
</pre>


[[Image:Redirect.jpg|15px]] [[#top|''Return to Contents'']] or [[Main_Page|''Return to Main Page'']]

===View VivaCT40/uCT35 VMS filesystem from a Windows PC===

The HP program that allows the VMS file system to be viewed by a PC is called Pathworks (on the VMS system).  The following information is needed to connect to the VMS system:

<pre>
USERNAME: vct_40
PASSWORD: uct
WORKGROUP: microct
</pre>

Then, in Windows explorer, while connected in the same network as the VMS station enter the following IP address for SCEVAL:

<pre>\\136.159.74.140\</pre>

Alternatively, map the drive.
<pre>
Right click on my computer and choose map network drive. 

Folder:
\\136.159.74.140\SB_DATA
or
\\136.159.74.140\SB_PROJ
or
\\136.159.74.140\BH_DATA
or
\\136.159.74.140\BH_PROJ


User name: vct_40@microct
Password:  uct
</pre>


[[Image:Redirect.jpg|15px]] [[#top|''Return to Contents'']] or [[Main_Page|''Return to Main Page'']]

===Map a Network Drive to the VMS filesystem from Windows===

To do this you must be on the same network as the OpenVMS system. For main campus and the XtremeCT, you will map the drive to Thomas (136.159.130.28), the workstation connected to the scanner.

<pre>
Right click on My Computer and choose Map Network Drive... 

Folder:  \\136.159.130.28\uct_data1     !FOR THE PROJECTS DISK

         and/or 

         \\136.159.130.28\uct_data2     !FOR THE DATA DISK

User name: microct\xtremect
Password:  uct
</pre>

Note:  You must use the numerical IP address and not the host name (i.e. thomas.kin.ucalgary.ca).


[[Image:Redirect.jpg|15px]] [[#top|''Return to Contents'']] or [[Main_Page|''Return to Main Page'']]